Compact Carbotech with blue lettering
On the Panerai Submersible PAM2231 replica, the only colour on the dial is one shade of blue. It is used for the SUBMERSIBLE line under the Panerai logo, for the small print under AUTOMATIC and for the small seconds hand at 9. Everything that glows is white: the round plots, the batons and the hour and minute hands. The dial itself is plain matte black, so the blue stays easy to pick out in the hand-held photos, and the date window sits at 3.
Case, back and strap
Case and bezel are Carbotech, and the side shots show its layered, marbled grain running over the bezel edge and the crown guard bridge, whose lever carries the REG. T.M. marking. The bezel has 15, 30 and 45 numerals and white minute marks. The solid back is Carbotech too, engraved with a frogman, Carbotech and Ti Case Back lettering and an edition number. A black pin buckle closes the black rubber strap. The grain is never laid out the same way twice, so check the pattern of your own case on your QC photos.
Turquoise and steel relatives
In the same 42mm Carbotech size, the PAM960 trades the blue for turquoise lume and print. The blue lettering also appears on the steel QuarantaQuattro PAM1229 and on the brushed steel PAM2683, if you prefer metal to composite. The PAM1229 has a steel bezel with 15, 30 and 45 numerals, and the PAM2683 has a dark bezel insert with steel-tone studs. Read about the material in our case materials guide and see the full Submersible series.
PAM2231 or PAM960?
Both are 42mm Carbotech. The PAM2231 uses blue for the lettering and seconds hand with white lume; the PAM960 uses turquoise for the lume and print.
Will my case look exactly like the photos?
The marbled pattern varies from case to case, so yours will differ slightly; you see it in your QC photos before shipping.





























